> For the complete documentation index, see [llms.txt](https://docs.giraffecctv.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.giraffecctv.com/edge-controller-v2/overview.md).

# Overview

The Edge Controller V2 builds on the success of the original Edge Controller, and adds extra functionality, performance and stability.

<figure><img src="https://2701567920-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FsZS3YRsoEs7DBwWBJpaD%2Fuploads%2Fxv0u7opuoT5azh6hQx19%2Fimage.png?alt=media&amp;token=074c20c9-ec80-4585-b336-703f92696b77" alt="" width="563"><figcaption></figcaption></figure>

## Features

* Onboard, independent 'lights out' controller that enables you to switch the unit on and off remotely even with the main router powered off.
* 'Always on' GPS tracker with internal backup battery
* A fully featured NVR system with an M.2 SATA slot for a SSD.
* Our own AI based around the Google Coral AI chip
* 8 individually controlled power outputs with efuses, current monitoring and short circuit protection
* 8 isolated inputs for external switches / proximity sensors.
* 4 x serial ports for integration with Victron Ve.Direct devices, EFOY fuel cells and Luminite wireless PIR systems.
* Audio output for live talk down and prerecorded messages.
* Two 4 pin fan outputs with speed control and monitoring
* A compass and movement sensor so we know which way the solar panels are facing
* Various environmental monitoring sensors including dual external temperature sensors.
* Typical power consumption of 2-3 watts
* Remotely configurable low voltage mode to protect batteries from over discharging

## Availability

We are aiming for general availability in quarter 1 2026.
