On site setup checklist

Checklist for checking the health of a system you have just deployed.

• Live View - Can you see all the cameras you expect and checked their field of view?

• Recording - Check each camera individually.

• Schedules - Have you set your schedule on a team level and applied them to relevant systems.

  • Remember to to apply to schedule to each of systems on your site. Schedules are done on a per system basis.

• General System Settings

  • Battery readings - can you read the battery levels

  

  • Is the mains power connected?

  • Do you have solar panels or an EFOY fuel cell, can you read them and are they working correctly? Is your battery charging?

  

  • Can you see the router details?

  
• Camera masking - AI will be carried out on the whole image unless the area is masked out. The masked area will be ignored.

• Audio talkdown - Is it enabled and tested?

• Alarm config and Active Threat Deterrent

  • Alarm levels - are you happy with the alarm levels and checked what triggers each alarm.

  • Power Disconnected Alarm - This will trigger an error state so disable if it is a solar / battery powered system

  • Strobes during talkdown

• ARC / Central Station - Check that your central station settings are inputted and that alarms can be sent / received.

• Notifications - Do you have a support mailbox to send health alerts too, make sure they are added to the team as a user and that notifications for the systems are enabled.

• Walk test - Arm the system(s) and walk test the site. Make sure alarms are coming through to the central station/ARC. Disconnect the power, to devices and check alerts are received.